mechanical model
英 [məˈkænɪkl ˈmɒdl]
美 [məˈkænɪkl ˈmɑːdl]
网络 力学模型; 机械模型; 机理模型
双语例句
- The two-body mechanical model of dam and foundation is presented in order to provide a new method for stability analysis of dam and foundation.
建立了重力坝和坝基相互作用的两体力学模型，为大坝与坝基的整体稳定性研究与评判提供了一条新的途径。 - A meso mechanical model is developed to describe the longitudinal stiffness reduction and thermo dilatation variation of the composites caused by fiber breaking or fiber peeling o.
借助细观力学模型，研究了纤维断裂和剥离对宿主材料刚度和热膨胀系数的影响，并给出了相应的数学表达式。 - Study on Mechanical Model of Shield Tunnel Lining Structure with Cracks
带裂缝的盾构隧道衬砌力学模型研究 - Mechanical model and experimental analyses on shape memory alloy Torsion Actuator
形状记忆合金扭力驱动器的力学模型和实验研究 - This article analysed the loads of the drum brake and built the key brake's mechanical model.
通过对鼓式制动器的受力分析，建立了其关键受力部件的力学模型。 - Study on the Mechanical Model and Equilibrium Performance of Flexible Pipe with arc
弧形体挠性接管力学模型及平衡性研究 - A mechanical model of two-degree-of-freedom system with clearance was established, whose periodic motion and disturbed motion were studied.
建立了一类两自由度含间隙系统的力学模型，并研究了该系统的周期运动及运动的受扰运动。 - To analyze the variation of the parameters of the soil, the mechanical model and numerical method of the explosion compacting the cushion and soil are established.
为了分析爆炸挤压后土体参数的变化规律，建立了爆炸挤压垫层和粘土的力学模型及数值方法。 - To study the influence of ground stress in rock slope and cave deepness to differential weathering overhanging rock, a mechanical model was proposed.
在建立危岩的力学分析模型的基础上，研究了边坡中张性地应力和岩腔发育深度对差异风化型危岩形成与破坏的影响。 - In order to show the trees better in nature, based on diameter variety rate mechanical model, tree growth simulation's integrated mechanical model is proposed.
为了更好地表现树木在自然环境中的生长形态，在基于直径变化率的趋向性力学模型基础上，提出了一种模拟树木生长的综合力学模型。 - Based on structural dynamic theory, the resonance mechanical model is established.
根据结构动力学理论，建立了边坡共振的力学模型。 - Mechanical Model and Boundary Condition From the Edge Joint of Giant Transformer Fuel Tank
大型变压器油箱箱沿力学模型和边界条件模拟的研究 - In this paper, APDL parameters of design and Finite Element Analysis of star gear are taken for example to research on the design, calculation and construction of the Mechanical model.
以APDL对星轮的参数化设计与有限元分析为例，先对行星齿轮力学模型进行建模，并对参数化设计计算进行研究。 - Mechanical model and analysis of casing bucking in horizontal wells
水平井套管弯曲力学模型与计算分析 - A mechanical model of human finger is set up according to the human anatomy.
摘要根据人体解剖结构建立了手指机构学模型。 - Based on the rock dynamic destabilizing phenomena, the mechanical model of two rocks system was established.
基于岩体动力失稳现象，建立了两体系统的力学模型。 - Mechanical model for pile-driving is presented according to the soil deformation behavior and yielding criterion of structural soft soils.
根据结构性土体的变形特征和屈服准则，建立打桩力学模型。 - On the basis of mechanical model and formula of single bit, the moment model and load fluctuation model of shearer's drum are built.
根据单个截齿的受力模型和计算公式，建立了采煤机滚筒力矩模型和载荷波动模型。 - Establishment and analysis of sucker rods mechanical model in horizontal well
水平井抽油杆柱力学模型的建立与分析 - A mechanical model of the uniaxial extension of composite solid propellants is propounded in this paper.
本文提出了复合固体推进剂单向拉伸力学模型。 - Taking Xuechun Mine for instance, KHT cushioning damping synchronous decking plate swing deck used in the mine is analyzed, and establishes mechanical model of bearing.
以薛村矿为实例，分析了KHT型缓冲阻尼同步摇台应用于该矿副井的情况，并且建立了托爪承接力学模型。 - Using Euler angles to express mechanical model of walking robot system
应用欧拉角表达步行机器人系统的机械模型 - Discussion for mechanical model in finite element analysis of grouser effect
对于履刺效应有限元分析中力学模型的讨论 - Based on the nonlinear FEM, a mechanical model for PDM used in medium-and short-radius horizontal well drilling is established in this paper.
应用非线性有限元法，建立了中短半径水平井螺杆钻具力学模型。 - Through study on the relationship between mechanical model and actual deformation, an equation of unblocked shear wall deformation was provided.
通过以上对力学模型和实际变形相关关系的分析，以及力学关系的推导，提出无填充块剪力墙的受力变形计算公式。 - Keywords: micro-cantilever sensor, mechanical model, piezo-resistive materials, finite element method.
关键词：微悬臂梁感测器、学模型、阻材料、限元素法。 - On the basis of the tire experimental results, using statistical fitting methods in this paper set up a tire mechanical model.
通过对轮胎试验结果的分析，用统计拟合方法建立了一种适用于转弯制动联合工况仿真的轮胎力学模型。 - The simplified mechanical model is proposed with analysis of forces of abutments in this paper.
通过基牙的受力分析，提出了基牙的简化力学模型。 - A viscous-elastic-plastic mechanical model was established based on the mechanical performance study of the honeycomb cardboard.
通过对蜂窝纸板力学性能的研究，建立了蜂窝纸板的粘弹塑性力学模型。 - Study on Mechanical Model of Thixo-forming for TiC-Ni Cermet
TiC-Ni金属陶瓷触变成形的力学模型研究